Sunday, September 1, 2019
Customer Needs and Expectations
Here at Travel Weekly one of the representatives at Virgin Atlantic have honoured us by writing an article about ââ¬ËA day as a representative' Lets see what Kaye Goodwin from Virgin Atlantic has to say! In a day of a representative at Virgin Atlantic I have to look at how these needs are identified and I must cover: Customer requests in writing Customer requests to representatives of organisations verbally (face to face or telephone) Recognition of unstated needs Customer type one: FamiliesIf a family was too put in a request in writing, because they may have young children, they could possibly write their requests to me in an email because of convenience and time. For example: a mother and father of two young children will not have time to come into the travel agents to sit down and tell me what type of holiday they would like. Therefore by sending me an email with the requests they would like, it would save a lot of time, and I can look up all of the information for them and re spond back to them via email.Customer type two: Couples If a young couple would like to go on a short break or a holiday, they would come into the travel agent and sit down with me too tell me where they would like to go and what type of holiday they would like. For example: a young couple from Central London would like to book a holiday for early December. They come into the travel agent and sit down with me and tell me what type of holiday they would like. After looking up and discussing different holidays, they would make a decision and hopefully book the holiday.If they would like more time to think about it, I would give them a few broachers to take home with them while they thought about it. Customer type two: Elderly couple An elderly couple are most likely to come into the travel agents and sit down with me to discuss the holiday they would like to go on. After discussing a few holidays, I would recommend a holiday. E. g. I would say ââ¬Ëthere is a lovely villa in Spain t hat is on offer at the moment that is about half a mile away from the beach. If one of the couples were to say that they have been to Spain before and it was too hot, or that their partner was not able to walk very far, that would be known as a recognition of unstated needs, meaning that they would like to go to a destination that is at a cooler climate or they would like to stay in accommodation closer to the beach. Customer type four: Disabled People that have a disability can communicate with me in any way, i. e. face to face, via email or on the telephone.If a customer was to call me and ask for information on different holidays but said that they were disabled, I would realise that this would mean they would be a unstated need, and they would need special assistance. For example if a lady who wanted to book a holiday and was blind or visually impaired, I would know that they would need maps or signs to be put up in Brail and raised floors so they know when they are too close to a swimming pool. Task 2b ââ¬â explain how travel and recognition of their needs.Tourism organisations meet and exceed customer expectations using examples from companies in the travel and tourism industry that you have researched. When our company (VA) recognise customer needs, the customers can be face for face with one of our representatives, have an online chat with one of our representatives or write their requests too us. We meet customer needs by making sure that all of the flights operate on time, airline staff are always available for assistance and always make sure that customers are kept up to date with important information such as flight times, flight delays and check in times.The way that we meet these needs are by keeping staff updated with information, regular announcements for customers at the airports and making sure that landings/take off are planned properly to avoid delays if possible. Task 2c ââ¬â analyse how travel and tourism organisations meet and ex ceed the customer needs and expectations through the recognition of their needs. You should expand the links between needs, identification of needs and being able to meet and exceed customers expectations. Here at Virgin Atlantic, we identify and meet customer needs through customer survey questionnaires/ comment cards and customer forums/focus groups.When the survey questionnaires or comment cards have been read by a member for our staff, usually the customer service manager, they then analyse all of the comments to find areas of improvement in order to meet customer needs. For example, if a number of customers have complained about staff not knowing obvious information i. e. directions around the airport, prices of products or check in times, that would tell us that our staff are unequipped to help our customers. From this, we will then need to realise and work our a way to get more information into our staff in order to meet the needs of our customers more efficiently.This can be done in many ways, however the most ideal one for this situation would be to hold regular morning/afternoon meetings to keep staff updated with information. When we exceed customer expectations, we like to go that extra mile by giving out customers more in-depth information. An example of this would be when a customer asks simply the time of their flight, we like to make sure that our staff will fully inform our customers of their flight time, boarding time, gate number and if there will be any delays.At the Martime Museum (NMM) they meet and exceed customers expectations by making sure that the company works like clock work. All of the staff are given a two day induction and then on-going training pro grammes are offered to all staff. All staff are fully trained and new members of staff are teamed up with an experienced team member to meet all of the customers needs. At NMM there are customer comment cards, customer surveys and focus groups to ensure that the organization knows wh at their customers want and if there are any complaints being made.For an example if the museum had a number of complaints about staff not having enough product knowledge/information i. e. background history of the area they were working in, that would tell the managers/owners that their staff are unequipped to help their customers. From this information, they work their way to getting more knowledge into their staff. This can be done in so many ways but the most effective way would be to give the staff more training and hold meetings regularly o make sure that they have acceptable knowledge to be working with the customers.
Saturday, August 31, 2019
Costs and Manufacturing Overhead
1. How much overhead cost would be saved by outsourcing production of muffler-exhaust systems and oil pans if a. Overhead costs were entirely fixed costs?$0 would be saved because fixed costs do not affected by reduced number of labor caused by outsourcing. b. Overhead costs were entirely variable costs? (How is volume of activity measured at Bridgeton? Why is volume not measured by simply counting units produced?) All of them would be saved. If using numbers in 1988 for estimate, (5,766,000+6,532,000)*434% = $53,373,320 would be saved.Bridgeton accumulates all manufacturing overhead costs into one cost pool, and use direct labor dollar cost as the allocation measure to apportion the overhead costs in the cost pool.Unlike direct labor and direct material costs that can be traced to specific products, overhead costs could be administrative and manufacturing related so that not all of them are involved in ACFââ¬â¢s production. Therefore, there isnââ¬â¢t a high degree of correlati on between the units produced and the amount of manufacturing overhead used.2. How much overhead cost do you think Bridgeton and the consultants implicitly assumed would be saved by outsourcing muffler-exhaust systems and oil pans? They expect all overhead specific to product line of Muffler ââ¬â Exhaust systems and oil pans would be saved, which is ($5,766,000+6,532,000)*434% = $533,733,20 (using 1988 data for estimate).3. Calculate the overhead allocation rate for each of the model years 1988 through 1990. Are the changes since 1987 in overhead allocation rates significant? Why have these changes occurred? a) divide total overhead ($) by total direct labor ($) showed in Exh.2 to get overhead rate. | 1987| 1988| 1989| 1990|Overhead Rate| 437% = 107,954/24,682| 434% = 109,890/25,294| 577% = 78,157/13,537| 563% = 79,393/14,102| Costs and Manufacturing Overhead Bridgeton Industries Case Assignment Questions1. How much overhead cost would be saved by outsourcing production of muffler-exhaust systems and oil pans if a. Overhead costs were entirely fixed costs?$0 would be saved because fixed costs do not affected by reduced number of labor caused by outsourcing. b. Overhead costs were entirely variable costs? (How is volume of activity measured at Bridgeton?Why is volume not measured by simply counting units produced?) All of them would be saved. If using numbers in 1988 for estimate, (5,766,000+6,532,000)*434% = $53,373,320 would be saved.Bridgeton accumulates all manufacturing overhead costs into one cost pool, and use direct labor dollar cost as the allocation measure to apportion the overhead costs in the cost pool.Unlike direct labor and direct material costs that can be traced to specific products, overhead costs could be administrative and manufacturing related so that not all of them are involved in ACFââ¬â¢s production. Therefore, there isnââ¬â¢t a high degree of correlation between the units produced and the amount of manufacturing overhead used.2. How much overhead cost do you think Bridgeton and the consultants implicitly assumed would be saved by outsourcing muffler-exhaust systems and oil pans? They expect all overhead specific to product line of Muffler ââ¬â Exhaust systems and oil pans would be saved, which is ($5,766,000+6,532,000)*434% = $533,733,20 (using 1988 data for estimate).3. Calculate the overhead allocation rate for each of the model years 1988 through 1990. Are the changes since 1987 in overhead allocation rates significant? Why have these changes occurred? a) divide total overhead ($) by total direct labor ($) showed in Exh.2 to get overhead rate. | 1987| 1988| 1989| 1990|Overhead Rate| 437% = 107,954/24,682| 434% = 109,890/25,294| 577% = 78,157/13,537| 563% = 79,393/14,102|
Friday, August 30, 2019
Outsider Essay
The Stranger by Albert Camus is one of his best works. This novel tells the story of a man, Meursault, who is a moralist. Nothing seems to matter to him and his or anybody elseââ¬â¢s actions makes no difference. Camusââ¬â¢s use of language allows readers to discover the mood and meaning being conveyed through diction and word choice. His use of fgurative language can be seen throughout. Such an example of figurative language is imagery. From reading The Stranger, one can clearly picture whats happening as Camus beautifully describes every action f Meursault. In the first chapter, Meursault hears that his mother has died and says ââ¬Å"Maman died today. Or yesterday maybe, I donââ¬â¢t know. ââ¬Å". Him saying this shows his emotional indifference and establishes his character traits. It doesnââ¬â¢t show that he didnââ¬â¢t really care about his mother, but that he really doesnââ¬â¢t give great thought to much of anything. The death of his mother shows Just how emotionless Meursault is for the fact of not grieving over his mothers death. But while at the funeral, Camus oes in great depth to explain the heat of the day and all of Meursaultââ¬â¢s surroundings. Continuing with Camusââ¬â¢s use of imagery, at Mamanââ¬â¢s funeral Meursault states ââ¬Å"She was right. There was no way out. â⬠as he talks to the nurse who had said ââ¬Å"If you go slowly, you risk getting sunstroke. But if you go too fast, you work up a sweat and then catch a chill inside the church. ââ¬Å". Meursault says this only to his understanding that a person is born into a life that will only result in the death of that person. Death, like the harsh effects of the sun, is unavoidable. This idea is central to Camusââ¬â¢s philosophy in The Stranger, which posits death as the one central, inescapable fact of life. In prison, where Meursault has much time to reflect on his past, does he discover all the over-looked, finer aspects of his former free life. The author conveys this sense of discovery through the detailed flashbacks in the second part of the novel during his arrest. For example, Just moments before Meursaultââ¬â¢s execution, he vividly recalls is motherââ¬â¢s funeral. Whereas he was empty of feeling at the funeral, now he too faces eminent death and thus savors the moments as to when he was the mourner. Through Camusââ¬â¢s use of diction and language, he has expressed the mood and meaning to this story of a man who has been wrongly accused. And by doing so the author has grasped his readers and has given them a different perspective on life and how things are fine one moment and can go terribly wrong the next moment. Outsider By lalalalalalal
Thursday, August 29, 2019
All Quiet on the Western Front by Erich Maria Remarche
In the writer Erich Maria Remarque's novel All Silence of the Western Battlefield, the writer expresses his view through Paul of the hero. Paul is also a narrator to explain all the physical and emotional experiences of the struggle against the First World War. When Paul and some of his classmates took part in the war they were very enthusiastic as they believed that they were going to be purely for honor. But throughout the novel, Paul and his friends began to realize that this is indeed fear and sorrow. All the quiet Erich Maria Remarque of the Western Front was written and written in Germany during the First World War. At the moment, the attitude of war is that it is the glory, the picture of the most heroic death that anyone can have. However, quiet on the Western Front is an anti-war novel that shows the truth and reality of war. This book is banned by the German government and seems to be read and trusted by young people. During the Cold War, John F. Kennedy said: Before the en d of the war, mankind must end the war. The destruction caused by World War I (Remarque 1982) After that, Erich M. Remarque was in his pioneering work. Total silence of the Western Front is trying to spread this pacifist message and anti-war sentiment. This new type of war has been left behind as the greatest and most technically advanced deadly war at that time. The literary progress of all quiet Erich Maria Remarque in front of the west and All Quiet in the west front explains the two stories. It meticulously paid attention to the soldiers' ideas in World War I and detailed the fear of all wars; each story is not only a soldier's independent experience, but also a new appearance of the fight But there are. This war was seen through the eyes of Paul Bowmer, and his way of thinking was better developed than his comrade. His true silence about the symbol of the West, images, and fables - in this book we heard the word young man of iron which was used to represent Paul's generation. I ron youth is the ideal of a strong patriotic group of the motherland, they fight to fight to proud Germany and its history. The writer and character in the book tore this ideal compared to the reality of war, I feel the sky that it is useless. These young soldiers are not iron
Wednesday, August 28, 2019
Lumbar puncture or Spinal anesthesia Essay Example | Topics and Well Written Essays - 1250 words
Lumbar puncture or Spinal anesthesia - Essay Example General anesthesia is a state of controlled unconsciousness during which patient doesn't feel anything and may be described as 'anesthetized'. During general anesthesia, anesthetic medications are injected into a vein, or anesthetic gases may be breathed into the lungs. When these medications are carried to the brain by the blood, they effectively "numb" the brain, and produce unconsciousness. Regional anesthesia is the specialized use of local anesthetic to numb a part of the body. Regional anesthesia can be used for operations on larger or deeper parts of the body. Local anesthetic drugs are injected near to the bundles of nerves which carry signals from that area of the body to the brain. The most common regional anesthetics (also known as regional 'blocks') are spinal and epidural anesthetics. These can be used for operations on the lower body. Use of anesthesia has been recorded since prehistory,where Opium poppy capsules were used in Sumeria and succeeding empires. Simple apparatus for smoking of opium were used for adminstration of anesthesia. Contries like India and China initially used cannabis incense and aconitum. As per the Book of Later Han, the physician Hua Tuo performed abdominal surgery using an anesthetic substance called mafeisan, which literally means cannabis boil powder, dissolved in wine. Other variants like Solanum species containing potent tropane alkaloids , Coca and Alcohol were also used in these initial days. The use of above herbal anaesthesia had a crucial drawback compared to modern practice in context of standardisation, as described on Wikepedia by Fallopus that "when soporifics are weak they are useless, and when strong, they kill". This drawback was tried to overcome by, standardizing production as much as possible, with taking production occurring from specific famous locations (such as opium from the fields of Thebes in ancient Egypt). Anaesthetics were sometimes administered in the spongia somnifera, a sponge into which a large quantity of drug was allowed to dry, from which a saturated solution could be trickled into the nose of the patient. At least in more recent centuries, trade was often highly standardized, with the drying and packing of opium in standard chests. Later, use of gases and vapours was also notice during mid 1800. Henry Hill Hickman experimented with carbon dioxide in the 1820s. British chemist Humphry Davy in 1799 used nitrous oxide .Effective general anessthesia for surgery begin in 1846, when a dentist, William Thomas Green Morton, gave diethyl ether at Massachusetts General Hospital, in the first public demonstration of diethyl ether as an anesthetic agent. It was then, Oliver Wendell Holmes, Sr. proposed naming the procedure ansthesia.Anesthesia gained good public repute when Queen Victoria accepted chloroform a la reine from Dr. John Snow during the birth of prince Leopold in 1857. Local anaesthesia originated with the
Tuesday, August 27, 2019
Effect of Unions on Workers Essay Example | Topics and Well Written Essays - 250 words
Effect of Unions on Workers - Essay Example For example, in the United States such unions as Teachers, professional athletes (NBA and NFL unions) and United Auto Workers are successful. The successful union must ensure the members welfare is to their best of interest. The union achieve this through increased collective bargaining and speaking with one voice. The unions, therefore, provide better wages and salaries, better working conditions and other benefits. The Unions within particular professional are most likely to be successful. From example, teachers and professional athletes in US have remained successful. This is because, there can be quickly banded together as they share teething problems. In addition, the union membership is vast and hence they remain a force to reckon as the government must proactively consider before squashing them. The policies and tactics that make union successful is through active contribution to the union by members. Also, ensuring that the members adhere to the laws governing the union is central to the success of members. The unions can also use strikes and boycotts to convey their grievances to become stronger. Further, the union leadership is also key to the success of the union. The political environment is necessary to unions. The government would always try to squash the activities. Therefore, those political environments such as political partyââ¬â¢s campaigns may make promises to union members for support (Markowitz, 2000). When such parties ascend to power, they may fulfil the promises made to union members. On the other hand, when they fail, such members may find
Monday, August 26, 2019
Topic 3 Essay Example | Topics and Well Written Essays - 3500 words
Topic 3 - Essay Example Consumer behavior is what the whole marketing theory and concepts are based on. By studying consumer behavior, marketers hope to find the reason why the consumer wants to buy a certain product. It aims to help and identify how people make their buying decisions and also the factors that influence those decisions. There are usually two kinds of buyers, organizational buyers and consumers. We are only concerned with the consumers who are the ones who buy services and products for use by themselves. They buy things that serve their need for living and the basic requirements of life. They also buy products to make the world know about their personalities and reveal their attitudes and their roles in the society. In other words they not only cater to the physiological needs but also the psychological aspect as well. Individuality is a characteristic that a man develops due to the nature and the surrounding environment he spends that life in. the behavior of a person towards buying a certain product will therefore be different for everybody. They might have different tastes, likes and dislikes, attitudes and values and their decision making process will differ according to that. The three major things that influence the consumer's social environment are individual circumstances, personal psychology and the social environment. All these above mentioned factors have a lasting impact on the individuals buying behavior. Factors Social environment in which an individual lives his or her life helps greatly in shaping the life of people and their preferences. The culture that they are prevailing in, the reference groups to which they belong and cater too and the social class they exist in or the one in which they want to exist in. There can be an informational influence over them for example when they are told about the authenticity of a certain product's working. A customer can also be influenced by the type of reference groups that he or she relates too. A marketer needs to identify the needs and influences of the reference groups of his target market in order to understand their consumer behavior and plan out their offer in such a way that coincides with the needs and wants of the customer and caters to his or her influence. A customer can be influenced by the 'family of orientation' which is the basic family or the parental family that a customer has; a daughter might end up using the same washing detergen t her mother uses. Another kind of reference group is the family of procreation that is more of the extended family; a customer's buying decision might be influenced with the house of his or her in-laws and he or she might to carry out different tasks and buy certain kinds of products in the presence of their extended family. Secondary groups are the less formal groups which the customer doesn't end up meeting everyday and therefore they don't pose a lot of influence over the buying decision behavior of the customer. Individual characteristics tend to stem from demographics characteristics. The gender of the person, the age group with which he or she is belonging to, the stage of the lifecycle the customer is catering to and the customer's
Subscribe to:
Posts (Atom)